News Archives
Please select year below.

Current | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009

September 04, 2013

Electralloy is always up for a challenge and when a customer requested a special product for a critical nuclear application, Electralloy went outside of the industryís typical size capabilities and developed the process capability to produce ECK500 (UNS N05500), "Hot Finished and Age Hardenedî bars in diameters up to 16", exceeding minimum specification requirements.

The minimum mechanical properties required for the customersí critical nuclear application were 140 ksi Min. UTS, 100 ksi Min YS. and 20 % Elongation. Chemistry is in accordance with ASTM B865, AMS 4676, and QQ-N-286 Rev G.

Additional technical data on ECK500 may be viewed by clicking here.

For an immediate requirement, Electralloy currently has the following in Prime Saleable Inventory of ECK500.  

15.125 Diameter X 154”     Wt. 8,575 lbs. “Hot Finished and Aged Hardened”

15.125 Diameter X 169”      Wt. 9,400 lbs. “Hot Finished and Aged Hardened”

15.125 Diameter X 118”      Wt. 6,530 lbs. “Hot Finished and Aged Hardened”

15.125 Diameter X 111”      Wt. 6,165 lbs. “Hot Finished and Aged Hardened”

15.125 Diameter X 67”        Wt. 3,720 lbs. “Hot Finished and Aged Hardened”

Other sizes available upon request.


Ingot • Billet • Bar • Master Alloy • Weld Wire • G.O. Carlson Plate

Austenitic Stainless • Nitronic® • Martensitic • PH • Duplex • Nickel • Copper Nickel